1-1/4″ – 3″ NPT Cast Iron Check Valves:

• Vertical or horizontal Installation
• Full flow design – no restrictions
• Stops back-flow of water
• Neoprene polyester reinforced flapper: smooth-edge design with cast iron and non-corrosive metal backing plates and stainless steel fastener
• Rated at 50 PSI (115′ [35 m] of head) at 130° F (54° C)
• Stainless steel bolts
• Suitable for installation below basin cover

1-1/4″ – 3″ PVC Ball Valves:

• 150 PSI rated
• General purpose ball valve
• Ideal for a variety of applications

1-1/4″, 2″ Brass/Bronze Check Valves:

• 200 PSI WOG rated
• Metal to metal seals
• Vertical or horizontal installation
• Stops back-flow of water
• Suitable for installation below basin cover

1-1/4″, 2″ Brass Ball Valves:

• 600 PSI WOG rated
• Full port
• Quarter-turn operation

2″ – 8″ Flanged Check Valves

• Heavy-duty, ductile iron construction
• Angled seal for non-slam closure
• Non-clog design
• Reinforced disc
• Drip-tight seating
• Rated up to 250 PSIG
• Designed for both horizontal and vertical usage
• Optional backflow actuator and mechanical indicator

2″ – 8″ Cast Iron Plug Valves Threaded Connection: 2″ and 3″ Flanged Connection: 2-1/2″, 3″, 4″, 6″ and 8″

• Designed to handle solids-bearing flows
• Cast iron housing rated 175 psi
• 99% pure nickel welded seat
• 1/4 turn Buna plug
• Upper and lower ball bearings
• Provided with hand lever

Sewage Air Relief Valve

• Designed to maintain pipeline efficiency and provide protection by venting air that accumulates during system operation
• Cast iron housing
• Stainless steel trim
• Stainless steel float
• 150 psi rated